magnet on a stick is just the thing you need

i have done MLS gasket on wet liner/closed deck one 1400 cc last year using eBay item number:200533973765 with no problems 5000 miles on :clapping :clapping :clapping the main issue is that all the liners are level (check with a good straight edge not ruler ) if not then your wasting your time :head...

point taken , they should up date there imformation .
wha are you using on you cabby if you dont mind me asking ?

Hi folks as anyone used f/k shocks as below from discount MG rover spares on offer at the moment , thinking of replacing all mind with new springs on 1994 214 cabby and they dont lower the car like a boy racer . :clapping Rover 200 / 400 (R8) 89-97 inc Coupe Sports Suspension Dampers / Shock Absorbe...

belts power steering and alternator ( check if they are cracking up etc ) timing belt , water pump and tensioner and you'll better better off with a cam locking tool ( draper on ebay ) straightforward job really.

well if your looking at another engine i bought a 1998 cab a few weeks ago body is rough , but i got because it had a 8 month old hood on it , so i could replace mind and have some spares . its a 1.6 and done 42000 from new i dove it back from scotland and been using for the last 4 weeks daily ,it i...

Hi bill Building a 2000 1.8 at the moment and they are 8mm dia ,lengths of bolts are , 12 off 25 mm long under bolt head . 2 off 60mm long under bolt head . you could drill m6 hole out to 6.8 mm and retap with 8mm x 1.25 pitch tap , aslong as there is enough wall thickness on cast . all the best 961...

now that funny

you could swap the wiring and ecu because basically you changing everything from to donor car , alot of work i know or you could put your old dizzy on and run the old system being all the head are the same

thinking that you buy the later rover 25 car complete and transfer the wiring and ecu with gearbox etc , what does anyone think of that ?