Page 1 of 1
rover wheel stud lengths?
Posted: Sat May 25, 2019 8:07 pm
by Vinny1979
anyone know the thread pitch and length of the rover 220 studs?
is it 12 x 1.5 x 40mm?
also unsure on spline
Im looking at fitting longer studs to give me more wheel options with my 7mm hubcentric spacers
so thinking 60mm honda ones?
Re: rover wheel stud lengths?
Posted: Mon May 27, 2019 4:52 pm
by benh2019
Hi vinny,
Can't help you there but wouldn't mind knowing where you got the hubcentric spacers from.
I too would be interested in the stud sizes to increase the wheel size/options.
Cheers
Re: rover wheel stud lengths?
Posted: Mon May 27, 2019 5:56 pm
by Vinny1979
They were a group buy from a guy called Mitus on Rovertech many years ago
Re: rover wheel stud lengths?
Posted: Mon May 27, 2019 7:21 pm
by benh2019
What a bum looks like a long search to try and find some or have some made.
Re: rover wheel stud lengths?
Posted: Mon May 27, 2019 7:46 pm
by Johnny 216GSi
12 x 1.5mm is correct - not sure about the length
Hubcentric spacers with 100 x 4 PCD are available on Ebay. Plenty there. Either spacer plates or bolt-ons which replicate the stud pattern rotated by 45 degrees (more expensive).
Always wondered whether you can get true conversion spacers - so to a more common (??) size, e.g. 5 not 4 studs, etc. I know there are PCD converters...
Edited: You can:
https://www.ebay.co.uk/itm/2-x-22MM-WHE ... 2159070114 
Re: rover wheel stud lengths?
Posted: Mon May 27, 2019 8:00 pm
by benh2019
Great help a couple of options now. Thanks.