Doing an Engine swap & the replacement engine is older than the blown one.
It's a 2001 Rover 45 1.6, the replacement is from a 1998 Rover 216, obviously the replacement isn't the Wasted Spark K Series so doesn't have the CPS Lobe.
Question is can I just change the one Cam from the blown engine that has the CPS Lobe, as the replacement is Coil & Dizzy, or do I have to change both as a matched pair ?
The Cams are the same part number, which I know is just the Cast number. The Cam Lift is the same & the Profile is the same, I checked using a good quality 'Mimic' & Digital Vernier Calliper.
TIA
