Page 3 of 3
Re: Engine wiring
Posted: Wed Sep 09, 2020 5:27 am
by Xtrmjks
I’ve got a reply from Paul, “I don't believe this is an immobiliser issue as the engine ECU only stops
the injector drive when immobilised, the ignition coil drive is not affected.”
Re: Engine wiring
Posted: Wed Sep 09, 2020 7:38 am
by 220 GSi turbo
Thanks for the feedback
So if you have no spark (have you tested this at the 'king lead' straight out of the top of the coil, or used a spark plug at the end of one of the plug leads?), you have tried another coil and you are confident that the crank sensor and its circuit are ok, this is starting to sound like an ECU fault. Unusual, but still possible.
Re: Engine wiring
Posted: Wed Sep 09, 2020 9:31 am
by Xtrmjks
I’ve tried several coils. There’s no beg pulse to coil from ecu. I’m thinking ecu fault as well..
Re: Engine wiring
Posted: Wed Sep 09, 2020 10:29 am
by 961tat
What number is the ecu i have a few here that work and matching 5as and fob .
Re: Engine wiring
Posted: Wed Sep 09, 2020 11:08 am
by Xtrmjks
Ecu is mkc103400, engine is in a kit car, so no fobs or immobiliser.
Re: Engine wiring
Posted: Sat Nov 21, 2020 9:53 am
by Bobbybrown
Xtrmjks wrote: ↑Tue Sep 08, 2020 5:27 am
I have tried to contact him. No reply.
Bit late to the party here but I haven’t had any messages from you...