tonyinbeds · Post by **tonyinbeds** » Fri Oct 02, 2020 5:20 pm

This camshaft locking device simply slides between the 2 camshaft pulleys on 16 valve twin cam engines.

Any use to anyone?

£3.39
60% off

https://www.eurocarparts.com/p/laser-ca ... 16-LAS2626

RoverRevival · Post by **RoverRevival** » Fri Oct 02, 2020 8:13 pm

Should see mine now...*laughs*
50+ gaskets later there’s no anodised paint left on it..*laughs*

Post by **Plodder** » Mon Jan 31, 2022 10:43 pm

Does anyone know of a similar tool for the a D16Z4 DOHC engine thats inexpensive or whether this can be used?
I will need to replace my cam belt in the coming year as I want to do it when I do the valve clearances which are well overdue.

JOHNDQ · Post by **JOHNDQ** » Tue Feb 01, 2022 9:57 am

Plodder wrote: ↑Mon Jan 31, 2022 10:43 pm Does anyone know of a similar tool for the a D16Z4 DOHC engine thats inexpensive or whether this can be used?
I will need to replace my cam belt in the coming year as I want to do it when I do the valve clearances which are well overdue.

If you mean the D16A9/A8 you put 2 pins though the tops of cylinder 1 cam shaft bearing caps to lock the cams

JOHNDQ · Post by **JOHNDQ** » Tue Feb 01, 2022 9:58 am

Good luck getting anything for a Rover from the ECP's Bedford branch

Post by **Plodder** » Tue Feb 01, 2022 10:16 am

Well that sounds straightforward.
I guess if I had bothered reading a manual before responding to this post I would have found this out.

Thanks for the info

Laser Camshaft Locking Tool - Rover K16

Laser Camshaft Locking Tool - Rover K16

Re: Laser Camshaft Locking Tool - Rover K16

Re: Laser Camshaft Locking Tool - Rover K16

Re: Laser Camshaft Locking Tool - Rover K16

Re: Laser Camshaft Locking Tool - Rover K16

Re: Laser Camshaft Locking Tool - Rover K16