Page 2 of 3

Re: Rover 216 vdp sd3 project

Posted: Sat Sep 05, 2020 9:05 pm
by richard moss
Cthomas wrote: Fri Sep 04, 2020 9:02 pm Today done engine oil, oil filter, gearbox oil, dist cap, rotor arm, timing belt, adjusted alternator belt, fuel filter, cam cover gaskets and rear brake shoes as had a noise on Nearside rear brake to found the shoe starting to come off
Busy day :)

Re: Rover 216 vdp sd3 project

Posted: Wed Sep 23, 2020 7:51 pm
by Cthomas
Done the headlining today but the material is the wrong colour. It did come with the car

Re: Rover 216 vdp sd3 project

Posted: Wed Sep 23, 2020 8:13 pm
by 220 GSi turbo
I have heard that a perfect match for the original headlining used on Maestro and Montego (and therefore probably on contemporary 200 and 800 ranges) is no longer available, but Woolies can supply a fairly close alternative.

Re: Rover 216 vdp sd3 project

Posted: Wed Sep 23, 2020 8:37 pm
by Cthomas
220 GSi turbo wrote: Wed Sep 23, 2020 8:13 pm I have heard that a perfect match for the original headlining used on Maestro and Montego (and therefore probably on contemporary 200 and 800 ranges) is no longer available, but Woolies can supply a fairly close alternative.
That’s good to know

Re: Rover 216 vdp sd3 project

Posted: Thu Sep 24, 2020 8:52 am
by Cthomas
The head lining removing with the help of the kitten 😂
https://flic.kr/p/2jKLs3V
Used nail varnish remover to get the old glue off
https://flic.kr/p/2jKKwVX
https://flic.kr/p/2jKFXur
Ready to start
https://flic.kr/p/2jKLrQq

Re: Rover 216 vdp sd3 project

Posted: Thu Sep 24, 2020 8:53 am
by Cthomas
Finished back in
https://flic.kr/p/2jKFXrA
Image

Re: Rover 216 vdp sd3 project

Posted: Sat Oct 10, 2020 11:29 am
by Cthomas
Not done anything to it as back is back but fill d it up again got 36.9 mpg from 70 miles local running around and then going To Milton Keynes.
The next jobs on the list are thermostat, anti freeze and n/s/r window that isn’t working.

Re: Rover 216 vdp sd3 project

Posted: Sat Oct 10, 2020 12:02 pm
by StubbornPatriot
Keep the updates coming. It's good to see where you're up to with this one. Cheers, Duncan.

Re: Rover 216 vdp sd3 project

Posted: Sat Oct 10, 2020 2:18 pm
by Cthomas
StubbornPatriot wrote: Sat Oct 10, 2020 12:02 pm Keep the updates coming. It's good to see where you're up to with this one. Cheers, Duncan.
I’ll be getting it looking nice for next year shows and in one colour 🤞

Re: Rover 216 vdp sd3 project

Posted: Sun Nov 29, 2020 3:58 pm
by Cthomas
Stripped the near side rear electric motor a part to see if it was fixable. Fitted new set of brushes and the motor worked. So refitted it into the car.