Rover 200 & 400 Owners Club

hey wassup people, im kane i drive a rover 416sli honda type..... mods are

full black light neon glow
full cream leather
a pillar mount volt, vacum, air fuel ratio
induction kit
nitros oxide - purge valves also
2inch system cat back 5inch slash box
wolfrace yakuza 17s
lowered 40mm puma springs
ripspeed T wing
venom 3.75" tacho
pivot shift light
420 bonnet old grill
420 rear number plate panel
flush boot in process
white graffics
pioneer 8400dehp deck
jbl 1000w sub
splx 400w amp
fusion 17cm 2 way 290w
jbl 5*7" 2 way 330w
clear tail lights

car was dyno'd at 146.7bhp at the front wheels

looking at doing some more work to the engine..... either direct port nitros injection or forge internals greddy turbo kit.... or the mini me conversion d16z6 vtec head etc...

so i saw the site and thought id join up as im a rover enthusiast

Hi, Welcome to the site.

Welcome to the forums.

Welcome mate, got pics of the inside?

nope not yet but will take some soon..... got a few other piccys also..

guess what i hit a fallen tree doin 60mph thank god im ok but tha car is a right off twisted the top of tha chassis and all suspension mounts and struts are gone, windscreen is mashed along with tha drive shafts have both snapped both front guards are damaged and the doors are too passenger side dun open *laughs*..........
piccys

Oh dear perhaps you can claim off the person whose land the tree fell from?

It doesn't look badly damaged from the photos. Are you sure it has damaged the chassis. If not a new screen and wing would see you on the road again.

Either way it is a write off if you claim from the insurance as a screen, a wing, and a bumper replacement is more than the car is worth.

sens3i wrote:guess what i hit a fallen tree doin 60mph thank god im ok but tha car is a right off twisted the top of tha chassis and all suspension mounts and struts are gone, windscreen is mashed along with tha drive shafts have both snapped both front guards are damaged and the doors are too passenger side dun open *laughs*..........
piccys

Lucky u are!

scrapper jobbie go get the parts from there n colour match them, windscreen scrapper jobbie

it could be easy job ;)
just sledge hammer any bent metal thats stopping the door opining or write the door off doing it ;)

on further looking at the pics the wing has most likely stopped the door opining looks as if it has gone into that werid door stopper & hinge! grind it off un bolt the bits u can.. take the door n straighten it ;) slege hammer is quick easy ;) just dont be shy ;)