Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Having problems with your club car? This is the place for asking advice and help on technical problems. Resident experts will be on hand to help you keep your car in tip top condition
Post Reply
User avatar
Dorchester
Club Member
Posts: 566
Joined: Mon Oct 07, 2019 10:00 am
Location: Bioule, France

Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Post by Dorchester »

I feel absolutely stupid to ask such a would be basic question!

But I cannot see anything under my bonnet resembling to the IAT sensor I'm supposed to find very close to the throttle body and the injection.

Following the sketch given by Haynes in 4A*5, I can see easily the throttle position sensor on the right, the idle air control valve not very far on the left, and at last on the far left the MAP sensor.

But where on earth is that IAT sensor that I assume has 2 wires? Which colours are those wires?
It should be very close to the TP sensor just on its left, but I can't see any.
Am I becoming blind?

Any picture would be very gratefully appreciated.
Thanks.
Rover 214i cabriolet v16 1994 BRG & lightstone leather
Rover 25 1.4 Saws Tuning remapped 2002 platinum silver
Rover 75 V6 2.5 1999 Atlantic blue & sandstone beige leather
Rover P5B coupe 1968 Arden green & buckskin leather
User avatar
g259fsg
Club Member
Posts: 446
Joined: Sun May 20, 2007 6:38 pm
Location: Dunfermline

Re: Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Post by g259fsg »

If your MAP sensor is the MHK100820 going into the manifold, this integrates the IAT thermistor. There are four connections going to the MHK100820: MAP, IAT and +5V and GND. If you think the IAT is faulty, you'd need to fit a new MAP sensor.
1990 Rover 214 GSi (VIN 222977)
1964 Humber Super Snipe Series V
1965 Humber Sceptre Mk.1
1966 Hillman Minx Series VI
User avatar
Dorchester
Club Member
Posts: 566
Joined: Mon Oct 07, 2019 10:00 am
Location: Bioule, France

Re: Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Post by Dorchester »

I'm just in need to bypass the IAT 2 wires and replacing the sensor with a 20 kOhms resistor, the same "trick" I've done in my 1994 214 cabby to ease the engine accepting ethanol. It works fine in the cabby since 2019.
I thought that the IAT integration within the MAP sensor was only found in my 1999 75 V6 2.5.
In my 214 cabby the IAT sensor is alone: why not in my 2002 25 1.4?
How can I know whether I've got a MHK100820 or not?
Which colour should be the 2 IAT wires?
Thank you.
Rover 214i cabriolet v16 1994 BRG & lightstone leather
Rover 25 1.4 Saws Tuning remapped 2002 platinum silver
Rover 75 V6 2.5 1999 Atlantic blue & sandstone beige leather
Rover P5B coupe 1968 Arden green & buckskin leather
User avatar
g259fsg
Club Member
Posts: 446
Joined: Sun May 20, 2007 6:38 pm
Location: Dunfermline

Re: Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Post by g259fsg »

The MHK100820 looks like this https://rimmerbros.com/Item--i-MHK100820. Yes the Rover 75 uses this MAP. The 214 Cabby is an R8 and I think may use the earlier ECU which has an internal MAP in the ECU (look for the vacuum tube going into the ECU), and an external IAT somewhere on the air intake, well it is on my 214 but it is an early SPi version. If you've got a MAP sensor looking like the MHK100820 then the IAT is integrated. I don't know the wire colours on the connecting cable, but I do have the pinout for the MAP sensor if that is helpful.
User avatar
Dorchester
Club Member
Posts: 566
Joined: Mon Oct 07, 2019 10:00 am
Location: Bioule, France

Re: Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Post by Dorchester »

Thank you for your kind tips.

Here are 4 pictures of sensors as close as possible to the engine and throttle body.
Could anybody be able to tell me which is the IAT (or MAP) one?
I'm lost.
2 sensors have 3 wires hence I assume they're not the right ones.
One has 4 wires (MAP sensor?) and the last has 2 wires. I hope the colours are identifiable and may give some clues to those in the know.

https://e.pcloud.link/publink/show?code ... AS7XGvV7m7

https://e.pcloud.link/publink/show?code ... 2Ra8TY4Cok

https://e.pcloud.link/publink/show?code ... iFOQ7ivnEX

https://e.pcloud.link/publink/show?code ... aVWBQdpT1X

Any hope then?
Thank you so much!

Arnaud
Rover 214i cabriolet v16 1994 BRG & lightstone leather
Rover 25 1.4 Saws Tuning remapped 2002 platinum silver
Rover 75 V6 2.5 1999 Atlantic blue & sandstone beige leather
Rover P5B coupe 1968 Arden green & buckskin leather
User avatar
g259fsg
Club Member
Posts: 446
Joined: Sun May 20, 2007 6:38 pm
Location: Dunfermline

Re: Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Post by g259fsg »

Last one looks like the coolant temperature sensor. Can't see enough of the other three to identify them. You could also check the appearance against the parts shown on the Rimmers website for the 25. Have a look athttps://rimmerbros.com/SubCategory--Rov ... r--m-28281. Seems to use the MHK100820 MAP, though it might use a separate IAT. One is listed. presumably you've got the Haynes manual.
User avatar
Dorchester
Club Member
Posts: 566
Joined: Mon Oct 07, 2019 10:00 am
Location: Bioule, France

Re: Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Post by Dorchester »

Thank you.
At last I've found it! Too obvious, I'm a nut!

Here it is:

https://e.pcloud.link/publink/show?code ... TJz4cE0AsV

https://e.pcloud.link/publink/show?code ... 8xxzdlVnqX

But now the question is: amidst those 4 wires which is which?

I need:
1. the MAP sensor earth signal to ECU wire: is it the black and white one?
2. the Ambiant Air Temperature sensor wire: is it the pink and grey one?

Thank you soooo much!
Rover 214i cabriolet v16 1994 BRG & lightstone leather
Rover 25 1.4 Saws Tuning remapped 2002 platinum silver
Rover 75 V6 2.5 1999 Atlantic blue & sandstone beige leather
Rover P5B coupe 1968 Arden green & buckskin leather
User avatar
Dorchester
Club Member
Posts: 566
Joined: Mon Oct 07, 2019 10:00 am
Location: Bioule, France

Re: Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Post by Dorchester »

Here is the pic in the Haynes Manual but without any explanation about wires:

https://e.pcloud.link/publink/show?code ... AVSYcSJ4l7
Rover 214i cabriolet v16 1994 BRG & lightstone leather
Rover 25 1.4 Saws Tuning remapped 2002 platinum silver
Rover 75 V6 2.5 1999 Atlantic blue & sandstone beige leather
Rover P5B coupe 1968 Arden green & buckskin leather
User avatar
g259fsg
Club Member
Posts: 446
Joined: Sun May 20, 2007 6:38 pm
Location: Dunfermline

Re: Where is IAT sensor in my 2002 Rover 25 1.4 LHD?

Post by g259fsg »

If this works, here are the pin connections to the MHK100820 sensor:

Image

Hope this helps.
Post Reply