Hydraulic lifters
-
Jamesridgway1994
- Forum User
- Posts: 94
- Joined: Mon Jan 21, 2019 11:35 pm
Hydraulic lifters
Done a headgaskit and timing belt the other month along withn new water pump, thermostat pulleys new valve stem seals new cam stem seals, after putting it back together I found that a couple of the hydraulic lifters were knackered so I brought 16 new ones! Once the tourer was put back together with new lifters in she was still a bit tappy so few weeks later i changed out the oil and I thought I'd put some thicker oil in because she only slightly taps once if been driving her for 30+ mins so I thought maybe the oil was thinning out once she get up to temp so I put some 20w50 mineral oil in, thicc stuff *laughs* and it done the trick for about 2weeks and now it only slightly taps after driving for 1 hour *laughs* , thinking maybe I got a dud lifter? Should I buy some new ones? Thoughts?
- RoverRevival
- Forum User
- Posts: 7558
- Joined: Fri Aug 26, 2011 8:08 pm
- Location: Manchester
Re: Hydraulic lifters
You should have soaked your new tappers in 10/40 semi for a day or so prior to fitting to make sure they were full of oil prior to fitting. The engine was only ever designed for 10/40 based on being in England’s tropical environment.
Did you also line up the oil feed holes in the tappet to those in the head or did you just drop them in?
Did you also line up the oil feed holes in the tappet to those in the head or did you just drop them in?
-
Jamesridgway1994
- Forum User
- Posts: 94
- Joined: Mon Jan 21, 2019 11:35 pm
Re: Hydraulic lifters
I soaked them in oil and aligned them that's why I'm still confused...
-
ROVER Cabby
- Forum User
- Posts: 1765
- Joined: Wed Feb 17, 2016 1:17 pm
- Location: UK
Re: Hydraulic lifters
Because ROVER, the end.
Mine have been like this since 2003 when it was 18 months old, finally silenced last week.
Mine have been like this since 2003 when it was 18 months old, finally silenced last week.
Re: Hydraulic lifters
If this only happened still done the head have you sealed the cam carrier with the correct sealant
214 Sprint track car
216 GTi track car
216 GTi DOHC
216 GTi Dunlop challenge race car
216 GTi track car
216 GTi DOHC
216 GTi Dunlop challenge race car
-
Jamesridgway1994
- Forum User
- Posts: 94
- Joined: Mon Jan 21, 2019 11:35 pm
Re: Hydraulic lifters
Its only done it since the work been done but I notice it more than other people but to me it sound like 1 lifter on the intake side right next to the belt like the first lifter, I used the red rtv sealent stuff
-
Jamesridgway1994
- Forum User
- Posts: 94
- Joined: Mon Jan 21, 2019 11:35 pm
Re: Hydraulic lifters
I reckon its something silly because its not that loud and tbf the alternator belt moving is about the same kind of volume, but its just a ball ache to take it apart to look at 1 single lifter *laughs*
-
Jamesridgway1994
- Forum User
- Posts: 94
- Joined: Mon Jan 21, 2019 11:35 pm
Re: Hydraulic lifters
If you used RTV you got a major problem 
214 Sprint track car
216 GTi track car
216 GTi DOHC
216 GTi Dunlop challenge race car
216 GTi track car
216 GTi DOHC
216 GTi Dunlop challenge race car
-
Jamesridgway1994
- Forum User
- Posts: 94
- Joined: Mon Jan 21, 2019 11:35 pm






